If you see any errors in this tutorial or have comments, please let us know. This work is licensed under a Creative Commons AttributionNonCommercialShareAlike 4.0 International License. CurvesJ David EisenbergThis short tutorial introduces you to the three types of curves in Processing: arcs, spline curves, and Bézier curves. ArcsArcs are the simplest curves to draw. Processing defines an arc as a section of an ellipse. You call the function with these parameters: arc(x, y, width, height, start, stop);
The first four parameters are the same as the ones for void setup() { size(300, 200); background(255); smooth(); rectMode(CENTER); // show bounding boxes stroke(128); rect(35, 35, 50, 50); rect(105, 35, 50, 50); rect(175, 35, 50, 50); rect(105, 105, 100, 50); stroke(0); arc(35, 35, 50, 50, 0, PI / 2.0); // lower quarter circle arc(105, 35, 50, 50, PI, 0); // upper half of circle arc(175, 35, 50, 50, PI / 6, PI / 6); // 60 degrees arc(105, 105, 100, 50, PI / 2, 3 * PI / 2); // 180 degrees } Spline Curves
Arcs are fine, but they’re plain. The next function, curve(cpx1, cpy1, x1, y1, x2, y2, cpx2, cpy2);
Here is an example that shows a void setup() { size(200, 200); background(255); smooth(); stroke(0); curve(40, 40, 80, 60, 100, 100, 60, 120); noStroke(); fill(255, 0, 0); ellipse(40, 40, 3, 3); fill(0, 0, 255, 192); ellipse(100, 100, 3, 3); ellipse(80, 60, 3, 3); fill(255, 0, 0); ellipse(60, 120, 3, 3); } How do the control points affect the way the curve looks? Take a deep breath, because this is somewhat complicated.
Continuous Spline Curves
In isolation, a single Here is a curve connecting the points (40, 40), (80, 60), (100, 100), (60, 120), and (50, 150). In common usage, people use the first point of the curve as the first control point and the last point of the curve as the last control point. int[] coords = { 40, 40, 80, 60, 100, 100, 60, 120, 50, 150 }; void setup() { size(200, 200); background(255); smooth(); noFill(); stroke(0); beginShape(); curveVertex(40, 40); // the first control point curveVertex(40, 40); // is also the start point of curve curveVertex(80, 60); curveVertex(100, 100); curveVertex(60, 120); curveVertex(50, 150); // the last point of curve curveVertex(50, 150); // is also the last control point endShape(); // Use the array to keep the code shorter; // you already know how to draw ellipses! fill(255, 0, 0); noStroke(); for (int i = 0; i < coords.length; i += 2) { ellipse(coords[i], coords[i + 1], 3, 3); } } Bézier Curves
Though better than arcs, spline curves don’t seem to have those graceful, swooping curves that say “art.” For those, you need to draw Bézier curves with the bezier(x1, y1, cpx1, cpy1, cpx2, cpy2, x2, y2);
Here is a program that displays a Bézier curve and its control points. void setup() { size(150, 150); background(255); ellipse(50, 75, 5, 5); // endpoints of curve ellipse(100, 75, 5, 5); fill(255, 0, 0); ellipse(25, 25, 5, 5); // control points ellipse(125, 25, 5, 5); noFill(); stroke(0); bezier(50, 75, 25, 25, 125, 25, 100, 75); }
While it is difficult to visualize how the control points affect a Continuous Bézier Curves
Just as bezierVertex(cpx1, cpy1, cpx2, cpy2, x, y);
So, to draw the previous example using void setup() { size(150, 150); background(255); smooth(); // Don't show where control points are noFill(); stroke(0); beginShape(); vertex(50, 75); // first point bezierVertex(25, 25, 125, 25, 100, 75); endShape(); } Here is a continuous Bézier curve, but it doesn’t join smoothly. The diagram shows the control points, but only the relevant code for drawing the curve is here. size(200, 200); background(255); noFill(); beginShape(); vertex(30, 70); // first point bezierVertex(25, 25, 100, 50, 50, 100); bezierVertex(50, 140, 75, 140, 120, 120); endShape(); In order to make two curves A and B smoothly continuous, the last control point of A, the last point of A, and the first control point of B have to be on a straight line. Here is an example that meets those conditions. The points that are in a line are shown in bold. size(200, 200); background(255); beginShape(); vertex(30, 70); // first point bezierVertex(25, 25, 100, 50, 50, 100); bezierVertex(20, 130, 75, 140, 120, 120); endShape(); Summary

Cover
Download
Donate
Reference
Libraries
Tools
Environment
Tutorials
Examples
Books
Overview
People
»Forum
»GitHub
»Issues
»Wiki
»FAQ
»Twitter
»Medium